Totem Acoustic HAWK Tower Speakers
Totem Acoustic HAWK
Available in
Maple, Black Ash, Mahogany and Cherry
Break in time: 60 – 80 hours
Placement from rear wall: 1' - 6 feet'
Placement distance apart: 3' - 8'
Mass Loading: 2-10 lbs in each cabinet
Frequency Response: <29 Hz to 21 kHz ± 5 dB (with proper placement)
Impedance: 6 ohms
Sensitivity: 88 dB
Power: 120 W max. program
Crossover frequency: 2.5 kHz 1st order compensated
Woofer: 5 1/2" dia.
Special extreme long throw.
Non-resonant cone and dust cap.
Dynamic linear suspension for maximum airflow.
Patented magnet system.
Tweeter: 1" alloy dome.
Flexible linear suspension.
Special low resonance chambered unit
Max SPL's: In average room (4 m x 6 m)
107 dB peak from pair at 2 m
Dimensions: w 6.75 x d 9.5 x h 36"
w 170 x d 245 x h 910 mm
From: 
$2,795.00 pr
Call us today at:
(770) 931-0606

Description:

 

Specifications:

Soaring to new heights
The Hawk exemplifies total involvement with all your senses. Truly full range, extremely compact and aesthetically balanced, it has incredible attributes and strengths that will guide you like no other. Detail, continuity, harmonic nuances, timbre precision and its self-effacing holography produce an experience that will never cease to amaze and involve you. A soul mover of the highest calibre.

The “Claw” decoupling system, W.B.T. bi-wireable terminals, exquisite cabinetry and incredible unique drivers just hint at the magic behind the façade. Soar to new heights with this powerful Totem, you will never forget its true character: Elegant, Simple, Extreme High-End.

Monocoque cross-braced cabinet with genuine wood veneer on both sides
Standard “Claw” feet for best decoupling from floor
Optional “Beak” tuning pod
Hardwired crossover
Borosilicate damping
Silvered OFC wiring

Specifications:

The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.

It is only through the support of advocates such as yourself that true sound can be promoted...

Mass Loading: All Totem columns work very well without any type of mass loading. However if stability is an issue or if there is a particular over emphasis in the bass in the room they are used in, then mass loading can be experimented with. Variables such as electronics, wiring and room dynamics play a definite role and therefore the option is there for your experimentation. One may use: clean dry sand,silica sand, dry particulate matter or non-odor kitty litter.
Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.

Totem Speakers are on display in the Audio Alternative Atlanta GA Showroom.

For questions or information on Totem Acoustic call us today at 770-931-0606

Home Theater / Audio & Video
Pictures are property of Audio Alternative
©2002-2011 Audio Alternative Inc..
Audio Alternative Is Atlanta's High-End Home Audio Leader