Rega R7 Loudspeaker
Rega R7 Loudspeaker

Speaker specifications...
Height (without spikes)...972mm
Depth at plinth...............348mm
Width at plinth...............270mm
Weight................................17kg

Nominal Impedance........6ohms
Sensitivity...........(Approx) 89dB
Bi-wirable/Bi-ampable..........yes
Power Handling................125w per channel.

Power handling figures are quoted as a guide. Amplification between 30w and 500w can be used safely depending on the quality of amplification.

Price: 
Call
Call us today at:
(770) 931-0606

Description:

The R7 is an exceptional loudspeaker using a dynamic three driver set up allowing for bi-amplification. Most loudspeakers with an accurate low frequency output suffer problems in many rooms but the R7’s unique, advanced low frequency design will produce accurate, high quality low frequencies consistently in most rooms. The R7 also utilises an unusual high frequency arrangement to give a very even, extended, high quality treble performance. It is precisely these attributes which set the R7 apart form the competition, producing an extremely versatile, dynamic and musical sound.

Drive units:
The R7 uses a new three-way driver system developed from our flagship loudspeaker the R9. All drivers are produced in house to Rega’s exact specifications. This allows greater control over characteristics of each unit and ultimately this contributes a great deal to the outstanding sound quality.

One of the more important new features of the R7 is the single side firing 7" bass driver, which utilises a 6 layer voice coil in aluminium rather than copper. This allows us to eradicate any crossover filters for this driver giving the bass seamless integration with the mid range unit and exceptional timing.

Sound and set-up:
The drive units in the R7 have been designed with great care. The crossover needs no additional filter networks to compensate for drive unit problems. Unlike most manufacturers who boast about the complexity of their crossover’s, Rega are proud of of the simplicity of theirs. This simplicity means that bi-wiring will offer no advantage, and will often give worse results at an additional cost. Bi-amping will improve the performance of both mid/bass driver and tweeter units giving greater separation and control. For optimum results we strongly recommend using two Rega Exon 3 power amplifiers.

Cabinet Design:
With emphasis on sound quality and dynamics the styling compliments rather than stands out. However, the design of the R7 is particularly radical and quite a departure from accepted norms. It’s sleek lines are subtle, it’s dimensions inoffensive and slim - it will stand modesty rather than make a bold statement upon a modern spatial environment. The R7 directly utilises these styling que’s from the flagship speaker the R9 bringing a fresh, lively and modern style throughout the range.

As with other Rega loudspeakers we have used a quarter wave transmission line for the bass there is also a ported box chamber for the bass/mid driver. The quarter wave line also uses Rega’s unique “Tube” technology first seen on the Ela and has now been developed and upgraded to remove nearly all airflow restrictions within the transmission line. As a part of this upgrade we have developed a new wool support system using nylon rods, which keep the wool separated evenly throughout the airspace.

Rega has worked hard on achieving a dynamic, stylish and most of all enjoyable loudspeaker. We think you will agree when you audition the R7 that it is one of the finest loudspeaker systems on the market.

Rega speakers are on display in the Audio Alternative Atlanta GA Showroom.

For questions or information on Rega speakers all us today at 770-931-0606

Home Theater / Audio & Video
Pictures are property of Audio Alternative
©2002-2009 Audio Alternative Inc..
Audio Alternative is Atlanta's Premiere Home Theater & Custom Audio Video Design Center